The iW3623 is a high performance, two-stage, non-dimmable 45W SSL LED driver that integrates boost and flyback converters into a single IC to reduce BOM cost and simplify design versus conventional two-stage driver approaches. Compliant to the IEC61000-3-2 standard, the iW3623 offers Power Factor (PF) >0.95 from a universal input voltage of 100VAC to 277VAC, with total harmonic distortion (THD) <10% and low output ripple <5% over the entire range.
The iW3623 incorporates Dialog’s proprietary PrimAccurate™ primary-side control technology, eliminating the need for a secondary-side regulator and optical feedback isolator. It also allows FETs to be replaced with lower cost BJTs and uses quasi-resonant mode switching for both the boost and flyback stages and dynamic base current to optimize conversion efficiency and minimize EMI.
Protection features include an on-board, external NTC-based temperature protection circuit that reduces the output drive to the LEDs to protect the circuit from overheating while maintaining light output. For more information on the over-temperature protection derating feature, click here.
- High PF (>0.95) and Low THD (< 10%)
- Low Output Ripple Current (<5%)
- PrimAccurate™ - Isolated Off-Line AC/DC Controller
- 45W LED Driver for Non-Dimmable Commercial Solid-State Lighting Applications
- Flickerless™ Technology
- Removes Virtually All LED Flicker
- Resonant Mode for Optimal Efficiency
- Fully Protected
- NTC-based Temperature Derating Circuit
- Over-Voltage/Over-Temperature Protection
- Output Over-Voltage, Over-Current and Short Circuit
- Open LED Fault Detection
- Sense-Resistor Short Circuit Protection
- Single-Fault Protection
- Non-Dimmable LED Lamps and Luminaires
- Optimized for up to 45W Output Power
Ultra-Slim Ultrabook™ Adapters
|Refer #||Part #||VIN (VAC)||POUT (W)||VOUT (V)||IOUT (mA)||No Load Power|
|No Reference Designs found.|
Solid State Lighting
|Refer #||Part #||VIN (VAC)||POUT (W)||VOUT (V)||IOUT (mA)||Bulb Type||Dimmable||Dimmer Type|